CAB 4712 Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 53

CAB 4712 Скачать руководство пользователя страница 36

36

36

6.14.4 Dismounting the pliers assembly

If it is necessary to change the lifting cylinder flag (2) or the connecting rod (14), the following assemblies must be

removed from the dismounted assembly 'pliers'.

Fig. 39

Disassemble the pliers assembly



Disassemble the pads (1).



Loosen and pull out the sensor (8). Loosen the screws (7) and remove the compact cylinder (6) from the holder of
the base plate (1).



Loosen screws (10) and (11) and remove the cover (9) with connections.



Loosen the screws (18) and remove the covers (17) from the pliers jaws (15)..



Pull out the pliers jaws (15) and axles (16) .



Loosen the nut (13) on the connecting rod linkage (14) and screw
the cylinder piston (2.1) from the cylinder (2) out of the connecting
rod linkage (4).



Remove the connecting rod linkage (14) from the base body (1). If
only the connecting rod linkage (14) is changed, the cylinder (2) is
not dismantled and the next two points are omitted.

2.1

13

14



Only for changing the lifting cylinder (2), the sensor brackets (4) and the throttle valves (3)



Remove from the lifting cylinder (2).



Loosen nut (12) and remove lifting cylinder (2).

6 Adjustments

«
...
34
35
36
37
38
...
»

Содержание 4712






















































Отзывы:

Нет отзывов