19
5.7
Releasing the Transportation Lock
Before the applicators are delivered, a transportation lock (4) is mounted on the rod (1).
For the labeling operation, the transport lock (4) is pushed onto the stopper (2).
The stopper (2) brakes the lifting movement and triggers the flag formation.
2
4
3
1
Releasing the transportation lock
1. Loosen the screw (3) of the transport lock (2).
2. Move the transport lock (4) on the rod (1) to the
stopper (2).
1.
Tighten the screw (3) of the transport lock (2) to fix
the position.
If the position of the stopper (2) is changed to change
the application height, the transport lock (4) must also
be moved.
„6.6 Setting the Application Height“
Fig. 12
Transportation Lock
5.8
Mounting the Blow Tube
1
2 3
1
2
3
Fig. 13
Mounting the blow tube
The blow tube (3) can be rotated around its axis. By this principle the direction of the compressed air can be
optimized.
1. Loosen the screw (1).
2. Insert the blow tube (3) as far as possible into the provided slot B (2).
3. Tighten the screw (1) to ensure the blow tube stays in place.