Caarrier ComfortChoice Edge, Руководство пользователя, Страница: 12 / 44

10 10
Setting or changing heating/cooling setpoints
Your thermostat is installed with pre-set heating and cooling temperature
setpoints. You can use these or change them so your home is as warm or as
cool as you would like it to be. You can also temporarily change the tempera-
ture after you've programmed your thermostat according to your specific
schedule needs.
Follow the steps below to temporarily hold the temperature where you set it for
two hours until the next programmed cycle begins.
1. Open the thermostat door. You will see an arrow next to the word off, heat
or cool in the upper right corner on the screen, depending on the mode your
system is in. (If it's the first time you've used the thermostat, it will say
heat.) The pre-programmed heating or cooling temperature is displayed in a
box at the bottom of the screen.
2. To change the displayed temperature, press the up or down button located
on the right side of the display until you reach the desired setting.
3. To change the other temperature setpoint, press the mode button above
the screen. The arrow will move to the word cool or heat and the screen
will show that temperature in a box in the lower right corner