⑴
- Remote sensor
⑵
⑸
- Driver unit
⑶
- Front inverted hole
⑷
- TFT Color display
⑹
- USB port
⑺
- Power ON/OFF switch :
Move ON/OFF switch to ON/OFF side to power on/off the device.
⑻
- Antenna
⑼
- Power indicator
⑽
-
Power input port
⑾
- AUX in port
⑿
- Mode button
⒀
- Standby Button :
Short press to enter to enter or exit standby mode.
⒁
- VOLUME knob / MUTE button :
Turn it to adjust the volume; Press it to mute the sound.
⒂
- MENU Button :
Short press to enter Main menu ;
When the main menu interface, long press it to switch between black and white screen / color screen ;
Under
“Internet radio / USB/ UPnp / local radio ” mode, long press to enter WPS network pairing.
⒃
- Go left / Return
⒆
- Go right / Enter
⒄
- PRESET button:
Short press PRESET button to go favorite list. Long press PRESET button to preset the favorite list.
⒅
-SKIP knob / ENTER button :
Turn the knob to go up/down or previous/next; Press it for ENTER button to enter submenu or to
confirm setting.
Power Supply:
Use supplied AC adaptor (12V/3A) to connect the device IR D3 with electrical socket to supply power.
Power ON/OFF
Move the Power switch to ON/OFF side to power on/off the device.
First time to power on the device, please turn the Skip knob to select system language, and press Enter button to
confirm.
WIFI Connection
A-- First time to connect Wifi
1, When the device is powered on, select language and press
ENTER
button to confirm.
--When it comes to
“Enable ’Check Network when Power on’ ”. Turn
SKIP
knob( or press
◀▶
) and
select
”YES”. Then press
ENTER
button ,
--It will shows
“Would you like to configure Network now ?” on display. Select “Yes” and press
ENTER
button
to scan for available networks. Turn
SKIP
knob to select available WIFI name and press
ENTER
button to
enter the password input interface.
2, How to input the password :
