C4i HDC-5100W, Руководство пользователя

Страница: 11 / 15

Antenna port Connect to WiFi antenna.
PAIR button
■
Press quickly the button will copy the EDID of display device
to source device.
■
Press the button simultaneously both encoder and decoder
for 3 seconds will pair.
SERVICE port Firmware update port.
IR IN IR port input to receiving the signal of IR remote.
Antenna port Connect to WiFi antenna.
5.3 Pairing Instruction
Power on the transmitter and receiver then press simultaneously the PAIR
button for three seconds, and the LINK LEDs will flicker quickly. If the LINK
LEDs change from flicker quickly to indicate that means pair success. Then
let go of your hands and the LINK LEDs are off. When the encoder and
decoder have signal transmission then the LINK LEDs will flicker slowly.