
While
L4, L3
or
L2
is displayed, press the
Level
Selection
button to change the brightness of the
flames from the available options: 3- High,
2- Medium and 1- Low.
When the dynamic color rotation is selected and
L1
is displayed, pressing the
Level Selection
button
will change the color transition speed. Three speed
options are available: 1- Slow, 2- Medium, 3- Fast.
Heat Control
Pressing the
Heat Control
button once turns the
heater
ON
and
OFF
.
With the Heat
ON
and set temperature displayed,
press the
Level Selection
multiple times to cycle
through the 11 temperature settings: 82°F, ON,
64°F, 66°F, 68°F, 70°F, 72°F, 74°F, 76°F, 78°F, 80°F
(27°F, ON, 18°C, 19°C, 20°C, 21°C, 22°C, 23°C, 24°C,
25°C, 26°C).
ON
means the heater will work continuously.
Changing the temperature unit
(°C °F):
With Heat
ON
and display showing the set
temperature, press and hold the
Power ON/OFF
button on the touchscreen for 5 seconds. The
display will flash 3 times and units will switch from
°F to °C or °C to °F.
!
NOTE:
This can only be done through the
touchscreen controls.
Heater Enable & Disable Function:
From the touchscreen controls touch and hold
the
Heat Control
icon for 10 seconds. The ember
bed will flash six times to indicate that the heater
function is disabled. When the
Heat Control
button
is pressed while the heat is disabled, the ember bed
will flash but the heater will not operate.
To enable the heater again, touch and hold the
Heat
Control button
for 10 seconds. After the ember bed
flashes for a second time, heat function is restored.
!
NOTE:
This cannot be set with the remote control.
Timer Control
The
Timer Control
button is used to activate or
deactivate the sleep timer.
Pressing the
Timer Control
turns the timer
ON
and
‘8h’ appears on the display. Pressing the
Timer
Control
button a second time within 10 seconds will
turn the timer
OFF
. To set the timer, use the
Level
Selection
control to select the desired time from
the following: 8h, 1h, 2h, 3h, 4h, 5h, 6h, 7h.
The fireplace will shut off after the selected time
period. Switching the fireplace
OFF
with the
Power
ON/OFF
will clear any timer setting.
1
2
3
4
5
6
7
1
2
3
4
5
6
8
Ember Bed
The
Ember Bed
button is used to change the ember
bed colors by cycling through the available solid
color options ‘d8’ through ‘d2’ and the dynamic color
rotation option ‘d1’.
When the
Level Section
is pressed while ‘d1’ is
displayed, the color rotation speed will change:
‘1‘– Low, ‘2’– Medium, ‘3’- Fast. With ‘d8’ through ‘d2’
displayed, the
Level Selection
button will adjust the
brightness of the ember bed from 3- High,
2- Medium, and 1- Low.
Level Selection
The
Level Selection
button is used to adjust the heat
setting, as well flame and ember bed brightness,
color crotation speed and timer setting. See relevant
section for more details.
Backlight Control
Press the
Backlight Control
to turn
ON
the
backlights. Pressing multiple times on this control to
cycle through different backlight colors or to turn the
backlights
OFF
.
1
2
3
4
5
6
7
1
2
3
4
5
6
8
1
2
3
4
5
6
7
1
2
3
4
5
6
8
1
2
3
4
5
6
7
1
2
3
4
5
6
8
1
2
3
4
5
6
7
1
2
3
4
5
6
8
Button Press
Flame Color
Display Value
1st Press
Red & Yellow
F4
2nd Press
Blue
F3
3rd Press
Red, Yellow & Blue
F2
4th Press
Color Rotation
F1
5th Press
OFF
NONE
When the
Level Section
button is pressed, while F4,
F3, or F2 is displayed, the light brightness cycles
through: 3- High, 2-Medium and 1-Low. When set
in dynamic color rotation mode, pressing the
Level
Selection
button will cycle through different color
change speeds: 1– Low, 2– Medium, 3- Fast.
!
NOTE:
The backlights can only be operated from
the remote control.
www.c3furnishings.com