2
3
4
1
5
Product Overview
Front Panel
3
Receiver
Receiver
Rear Panel
F
RONT
P
ANEL
D
ESCRIPTION
1
Power LED
On:
Power is applied to the device.
Off:
No power is applied to the device.
2
Status LED
Blinking:
The device is working properly.
Off:
The device is not working properly.
3
HDCP LED
On:
HDCP protected content is being transmitted.
Blinking:
Non-HDCP protected content is being transmitted.
Off:
No content is being transmitted.
4
Link LED
On:
HDBT link is normal.
Off/Blinking:
No HDBT link or link error.
5
RS232
Set the function of RS232 port.
PASS-THROUGH:
RS232 port is used to pass-through RS232
commands over HDBT.
MCU:
RS232 port is used to update MCU firmware.
VS:
RS232 port is used to update VS firmware.
Note
: Transmitter and receiver can only be updated separately.
R
EAR
P
ANEL
D
ESCRIPTION
6
DC 18V
Connect to the power adapter provided. With bi-directional
PoC function supported, connect the power adapter to the
transmitter or the receiver and power both units.
7
HDBT IN
Connect to the transmitter via a Cat 5e/6/6a/7 cable.
8
IR IN
Connect to the IR receiver provided.
9
IR OUT
Connect to the IR emitter provided.
10
RS232
For RS232 pass-through or firmware upgrade.
11
HDMI OUT
Connect to an HDMI display device.
9
10
7
6
8
11
(us)
HDMI H RS232 and IR over Cat Extender Box
Transmitter to Box Receiver
-
4K 60Hz
Содержание C2G30026
Страница 2: ......
