C-TEC EP203, Руководство по установке и обслуживанию

Страница: 45 / 45

EP203 AUTOMATIC EXTINGUISHER PANEL
Approved Document No. DFU0002032 Rev 4 • EP203 AUTOMATIC EXTINGUISHER PANEL INSTALLATION MANUAL • Page 45 of 45
A P P E N DIX 4 – Technical Specifica tion (continued)
CONTROLS & INDICATORS
Status Display Unit 128 x 64 pixel graphic LCD unit, two-colour backlight
Access Level 1 menu • Display Faults
•
Display Dis/mnt
•
Zones in Test
• Lamp Test
•
Alarm Counter
Access Level 2 menu • Display Faults
•
Display Dis/mnt
• Zones in Test
• Lamp Test
•
Alarm Counter
• Set Time/Date
• Event Log
•
Disp Contrast
• Disablements
Access Level 3 menu
•
Display Faults
•
Display Dis/mnt
•
Zones in Test
•
Display RSUs
•
Disablements
•
Commissioning
•
Engineering
Controls (2 x keyswitches)
•
accessed.
•
manual only, or manual & automatic.
Controls (pushbuttons)
•
menu, silence internal sounder, control panel reset,
silence/resound sounders.
• scroll (up), scroll (down), escape, accept.
•
Extinguisher Release (housed in yellow casing).
Indicators (LEDs) • general fire, fire zones (x3).
•
general disablement, zone fault/disable/test (x3).
• hold, first stage output, release imminent (x2),
extinguishant released, abort.
•
disablements: extinguishant release, manual release, first
stage output, second stage output, sounder.
• manual only, manual & automatic, supply present, power
supply fault, accessed, test, general fault, system fault,
delays, sounder fault, flooding zone fault, low pressure
fault.
Internal control (pushbutton) Access level 3 switch (located on Main Control PCB)
DIMENSIONS & W EIGHT
Dimensions of back box 439mm(w) x 276mm(h) x 70mm(d) approx. (metal)
Dimensions of lid 467mm(w) x 293mm(h) x 29mm(d) approx. (plastic)
Weight (without batteries) 4.2kg
O P ERATING CONDITIONS
The control panel enclosure has an IP30 rating and is designed for indoor use only. The components
are selected to operate within their specification when the environmental conditions outside the
enclosure comply with class 3k5 of IEC 721-3-3 : 1978. Temperature Range: -5 to +40
0
C. Maximum relative
humidity: 95%.
O P TI ONAL OUTPUT E X PANSION RELAY BOARD - P a rt No. EP 2 1 2
Number of volt-free relay outputs 5 (Reset, Mode Switch, Discharged, Hold, Abort)
O P TI ONAL REMO T E STATUS UNIT (RSU) - P art No. E P 2 1 0S (surfac e )/ E P 2 1 0F (flush)
RSU connection 2-wire RS485 + 2-wire power (24V)
RSU power output 19-28Vdc, 200mA electronic fuse
Max. number of RSUs 8
Number of monitored inputs 3 (Abort, Hold, Mode)
Status Display Unit 128 x 64 pixel graphic LCD unit, two-colour backlight
Dimension of surface-mount enclosure 160mm(w) x 240mm(h) x 51mm(d) approx. (metal)
Dimension of flush-mount enclosure 175mm(w) x 250mm(h) x 53mm(d) approx. (metal)
O P TI ONAL ECONOMY STATUS UNIT ( ESU) - P art No. EP 2 1 1
ESU connection 2-wire power (24V) + 2-wire mode select
ESU power 100mA electronic fuse
Max. number of ESUs 8
Dimension of flush-mount enclosure 87mm(w) x 87mm(h) x 35mm(d) approx. (plastic)
www.acornfiresecurity.com
www.acornfiresecurity.com