background image

User's Manual

HS-5600

Figure 14

Figure 14

Figure 15

Figure 15

Figure 16

Figure 16

OPERATION

8

Before operating your scooter, check the following:

  •

freewheeling lever is on D.

  •

speed dial is at the lowest speed (fully turned counterclockwise).

1.Sit on chair and fasten the seat belt. Insert the buckle (A) to (B) Depress the side button

   (C) to release.

2.When turn on switch, the Battery Lever Indicator light should be fully lit in all areas.

3.When your right hand rest comfortably on the armrest, the joystick should be easily

reached.Push the joystick in the direction you want to go, you may turn the chair in the

   360-degree direction. When you stop pushing the joystick the chair will stop.

4.Practice riding where there are no obstacles.  Start at the slowest speed and ride forward

and backward; make some turns.  As you get more comfortable you can increase the

   speed by turning the speed dial.

5.If the Power Reserve Indicator is only partially lit, you should plan to recharge the

   batteries very soon.

6.If the chair stops, locate the circuit breaker (D) on the rear unit. Push the circuit breaker

   and retry.

7.When you are finished riding, turn off the key before getting off.

8.The batteries should be charged as soon as possible after each ride. See Recharging the

   Batteries, page 13 and 14.

While standing up, avoiding stepping on the foot plate. It may cause injury.

Содержание HS-5600

















Отзывы: