Instruction Booklet
2-Series
OPERATING YOUR SCOOTER
7
You could make the following adjustments to increase your comfort when driving.
•
adjust seat height and location
•
adjust tiller angle adjustment to comfortable position.
•
adjust legroom.
This scooter has automatic braking system. Release the thumb lever
brake will stop scooter.
1.Before operating your scooter, check the following:
•
free-wheeling lever is in D
•
speed dial is at turtle picture.
2.Sit on scooter and turn on key; All Battery Gauge LED Lights should be lighting.
The Self-Diagnostic Warning Lights should not be blinking.
3.When your hands rest comfortably on handlebars, the thumb levers should be within
easy reach. Right lever moves the scooter forward; left one moves it backward. When
you release both levers, scooter stops.
4.Steer scooter by turning the whole tiller toward direction you want to go.
5.Practice driving where there is no obstacle. Start at the slowest speed and drive forward
and backward; are make some turns. As you get more comfortable, you can increase
speed by turning the speed dial toward picture of rabbit.
6.If two Battery Gauge LED Lights light lit, you should plan to recharge batteries very soon.
7.If scooter stops, locate the circuit breaker on top of battery pack. Push it and try driving
again.
8.When you are finished riding, turn off the key before getting off.
9.If you are finished riding for the day, immediately recharge batteries.
See
CHARGING THE BATTERIES
, page 14 and 15.
