CS1220XD - RAPID GET YOU GOING INSTRUCTIONS
Assemble and adjust for length (Twist surplus lead around stem).
Insert batteries.
Set the MODE SELECT (bottom right) to METER AUDIO DISC.
Set POWER ON/OFF TUNE (top left) to ON.
Set SENSITIVITY fully anticlockwise to the BATTERY CHECK position. The meter will
indicate in the right hand green sector if the batteries are OK.
Set SENSITIVITY to mid position (12 o’clock).
With the search head 1-2 cm from the ground, press and hold the RETUNE button (lower
mid) and adjust the TUNE control until a tone is just heard. Release the RETUNE button.
The CS1220XD is now ready for use. If the tone drifts from the threshold position press the
RETUNE button to reset the level.
You are now in a PROGRAMMED MODE. The other modes require more detailed
explanation found in the following pages.
IF A PROBLEM IS ENCOUNTERED REFER TO THE FULL INSTRUCTIONS.
1
