Product:
37" Pub Table Legs (TB03) with either 32" Round Table Top (TT01) or 37" Round Table Top (TT02)
Your purchase and who is C. R. Plastic Products Inc.?
Parts
You will need:
1. Two sets of legs. (A)
1. Drill
2. Two long stringers (B)
3. Two medium stringers (C)
4. Two small stringers (D)
5. Table top (E)
6. Bag of screws (24 - 2½", 4 - 2")
1)
2)
3)
4)
C. R. Plastic Products Inc. is an environmentally conscious Canadian company. Our "Generation Line" of recycled
furniture will give you years of comfort, style and maintenance free enjoyment. You will find your furniture to be
waterproof and durable. By choosing this product, you are saving generations of trees and are reducing the burden on
our landfill sites. Thank you for purchasing from C. R. Plastic Products Inc.
Step 1:
Take one of the legs (A), counter sunk holes facing you, and the small
stringers (D). Take one of the small stringers, counter sunk holes facing the bottom
of the table. The holes on the stringer are offset and should be closer to the outside
of the frame. Attach the small stringer (D) using 2½" screws. Repeat on the other
side.
Step 2:
Take one of the
medium
stringers (C) and line it up with the middle set of
holes and attach using 2½" screws. Take one of the
long
stringers (B) and line it up
with the bottom holes and attach using 2½" screws. Repeat to the other side .
Step 3:
Take the second set of
legs (A) and attach them to the opposite ends of the
stringers using 2½" screws.
Step 4:
Place the table top (E) upside down with the frame facing up. Slide the small
stringers (D) into the slots of the frame. Be sure to center it the legs approximately
8¼" in from the outside edges. Attach the legs to the table top using
four 2” screws
.
2. #2 Robertson
(square) or Phillips
bit.
crpproducts.com
Proudly Made In CANADA
