Visit us at
crlaurence.com
for international toll free information 6
A
C.R. LAURENCE Co., INC.
OPERATING THE SANDER
Caution!
Do not allow the dust bag to get too full. Empty the dust bag regularly to improve the dust
collection. Do not dispose of the dust particulate in an open fire. You should always empty the dust bag
each time before you store the tool away.
Caution! When working on metal surfaces, do not use dust bag or a vacuum cleaner because sparks
are generated.
Wear safety glasses and a dust mask. Due to the danger of fire, do not use your belt sander
to sand magnesium surfaces. Do not use for wet sanding.
OPERATION HINTS
Always start your belt sander before it is in contact with the workpiece. When possible, clamp your
workpiece to a work bench. Use the correct grit sanding belt for your application.
mAINTAINING
1) Never apply excessive force on your belt sander. This may cause overloading and motor damage.
2) Keep your machine clean at all times. Always keep the air cooling vents clear of debris using a clean
dry paint brush. Compressed air is not recommended because of the airborne particulates it creates.
3) Remove the electrical plug from the socket before carrying out any work on the device.
4) Never use caustic agents to clean the plastic parts.
5) Check the carbon brushes regularly (dirty or worn carbon brushes may result in excessive sparking).
6) This electric appliance is built in accordance with the relevant safety rules. Repair of electric appliance
must only be carried out by experts, otherwise it may cause considerable danger for the user.
