Operator Manual
Page 9 - 7
Initial issue: 02/13
Latest revision: -
2. WARNINGS
2.1 Prior to the installation
Verify that your electrical mains corresponds with one of the following three networks:
USA
120V AC +/- 10% - 60Hz
EUROPE
230V AC +/- 10% - 50Hz
JAPAN
230V AC +/- 10% - 60Hz
THE LABEL APPLIED ON YOUR MACHINE INDICATES FOR WHICH MAINS
THE MACHINE IS CABLED.
Verify your environmental conditions.
This machine is planned for the following environment:
Storage and transport::
Temperature: -34°C through 60°C : -30°F through 140°F
Relative humidity: 5 through 90% RH
Altitude: -31 m through 12 192 m / -100st through 4000st
Atmospheric pressure: ≥ 56Pa (420mm HG)
Work environment:
Temperature: 10°C through 32°C
Relative humidity: 10 through 85% RH
Consumption: 750 Watt
Noise level: 70 db
WARNING:
Never remove wall plug when the machine is running.
Содержание Document Finisher E Series
