
Press the On/Off button
and hold it down until the
green LED light turns on.
3: Turn C-me On
Setup C-me
CAUTION:
When landing outside (in outdoor mode), C-me will move higher first (3 m), then move over to the
landing point, then slowly land. This is a safety feature to reduce the chance of hitting obstacles
that may be in its flight path (Exception: if Follow Me is activated, C-me lands immediately. If you need
to land in a case of emergency, press the icon .
EMERGENCY
12: Land
TAP
80%
80%
Land
Charge the C-me battery with the included cable and
charge adaptor. When the green LED turns off,
the charge is complete. For UK users, charge C-me
using the included USB Charge Cord only.
1: Charge the C-me Battery
LED
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries.
App Store is a service mark of Apple Inc. Android and Google Play are trademarks of Google Inc.
Go to Wi-Fi Settings on your phone
and look for the network C-me-******.
Connect your smartphone with the C-me
network and enter your
password
“12345678”.
4: Connect your phone
to C-me
Wi-Fi
Network
We recommend that you
personalise your C-me by
changing your device name
and your password in the app
under: Settings > Device >
Change Name and Password.
Search in the App Store or on Google Play for
“C-me camera”
and load the free App onto your Smartphone.
2: Get the App
11: Controls
Move slider to change altitude (height).
Move your finger in this area to change
direction of travel.
5: Open up App
Important:
Familiarize yourself with the C-me functions by
watching the slide show. You can find this help in the app
under Setting > HELP > Slideshow),
10: Start procedure
Keep hands, face, hair and loose clothing away from
the rotors.
PRESS
Take Off
Note:
You can also carry out manual calibration under
"Settings > Calibrate“.
IMPORTANT!
You may be asked to calibrate the
C-me. Press okay to proceed. Press “Okay” to
continue and follow the instructions.
Press and hold the Lock icon for 2 seconds.
Follow the instructions on your smartphone.
Tap
Take Off
while it is green.
NOTE: For safety, C-me will only stay unlocked
for a few seconds.
Step 2
Calibrate Accelerometer.
Make sure C-me is on a flat, level surface.
Calibration
Step 1
Calibrate your phone. This helps C-me pinpoint your location
more accurately.
iOS:
Launch your phone compass
app and move your phone
in a Figure-8 motion at
least three times.
Andoid:
Open Google Maps, click your current location,
and run “Calibrate Compass“.
Step 3
Calibrate compass.
This helps C-me pinpoint your location more accurately.
A.
Set C-me flat on the ground.
Hold your phone at least 0.75 m away.
B.
Rotate C-me horizontally,
without lifting.
When ready to fly, push the UNLOCK icon,
select your mode (indoor / outdoor),
and then Take-Off to launch.
C.
When the video switches to vertical, pick up C-me slightly off
the ground and rotate with the camera pointing down.
Take Off
13: Power Off
Push and hold until light
goes out. Completely close
down app.
Always have the C-me
camera pointing toward you.
IMPORTANT!
OUTDOORS
Takeoff height
will be approx.
2 m
3 m
8: Start position
Open by pulling the notch at the end of each arm.
Ensure that the arms click into place.
6: Open Arms
Extend
the arms.
Open
completely.
Fit a propeller guard on each motor arm.
Pay attention and ensure that they have correctly
clicked into place.
7: Fit propeller guards
Important!
Your first flights should
always
be out in the open (outdoor mode).
Stop and Wait! C-me may need up to 2 minutes to find
quality GPS signals. While it searches for satellites, the GPS
icon will be “white”. The icon blinks “yellow” as it looks for
the strongest signals. When you’re safe to fly outdoors, the
icon turns solid “green”.
You may be prompted to change locations if C-me
determines that your area can’t provide quality GPS.
High-quality GPS signals are essential for smooth and
stable flight.
9: Wait for GPS Signal
Fly C-me
RESET
Find a wide open area away from trees, buildings,
metal and power lines.