C.M.A. LISA R SMMA, Инструкция по эксплуатации

Страница: 38 / 50

38
english
10. DS drink selection
10.1 Use
1) Insert the aspiration tube into the milk container;
2)
For cappuccino, coffee and milk or milk with a shot of coffee, fill the filter with the dose
of ground coffee and press it with the coffee press;
3)
Attach the filter holder to the dispenser assembly;
4)
Place the cup under the filter holder;
5) Select the desired serving and wait for completion of milk and coffee (the latter only
for cappuccino, coffee and milk or milk with a shot of coffee).
10.2 Programming coffee doses
Program the milk selections push button panel in the following way:
• Turn the programming key to the
ON
position (
P
flashes on the display);
• Hold the PROG/STOP key down on the left push button panel for at least 5 seconds (all LED on the push
button panels come on).
To stop delivery ahead of time, press the selected key again.
If the dose consists of coffee and milk, press the selected key repeatedly until the cycle is completely
interrupted. For manual delivery of warm milk, press the key
. To interrupt dispensing
of warm milk, press again the key .
i
10.2.1 Programming CAPPUCCINO and CAFFE LATTE
• Fill the filter with the desired dose of ground coffee, press it with the coffee presser and attach the
filter holder to the delivery group;
• Select the dose to be programmed (e.g. cappuccino);
• Wait for milk delivery;
• To confirm the dose of milk, press the cappuccino key again.
• Wait for coffee delivery;
• To confirm the dose of coffee, press the cappuccino key again.
The amount of cream can be modified with the regulator ( A ) located
under the upper grille. The sequence of delivery, be it first milk and
then coffee or vice versa, is established in the machine programming
phase (see chapter 14 "Programming machine parameters").
i
A