background image

3

General safety and accident prevention
regulations

To work safely with this machine and to prevent
accidents it is imperative to read the following safety
regulations and operating instructions in full and to
put all the information into practice.

Always check the machine, the power cable and 
the plug before use. Only ever use the machine if 
it is in perfect, undamaged condition. Damaged 
parts are to be repaired or replaced immediately 
by a qualified electrician.

Always pull  the plug out of the power socket 
before carrying out any work on the machine, 
before changing the grinding tool and in periods of
non-use.

Always run the power cable away from the back of
the machine to guard it from damage.

For outdoors work use only suitably approved 
extension cables with a minimum conductor cross 
section of 1.5 mm

2

. The plug connectors must 

have earthing contacts and be rain-water-proof.

Keep the machine in a safe place and out of the 
reach of children.

Always wear goggles, safety gloves and ear muffs
when using the machine for grinding, brushing 
and cutting purposes. Wear a breathing mask on 
dusty jobs.

For safety reasons the angle grinder is only to be
used with the guard hood and the additional 
handle fitted in place.

Secure the workpiece (with a clamp) so that it 
cannot slip.

It is imperative to use a dust extractor when 
working on stone (cutting or grinding). Make sure 
the dust extractor is approved for stone dust.

It is prohibited to use the machine on
asbestos materials.

Please note the accident prevention regulations in
force in your country.

Caution! Risk of fire! Make sure there are no 
combustible materials within the maximum radius 
of flying sparks when you are cutting and grinding 
materials.

Use only original spare parts.

Repairs are to be carried out by qualified  
electricians only.

The level of noise at the workplace may exceed 
85 dB(A). In this case you will need to introduce 
noise protection measures for the user. The noise 
produced by this electric tool is measured in 
accordance with IEC 59 CO 11, IEC 704, 
DIN 45635 Part 21, NFS 31-031 (84/537/EEC).

Make sure of your footing. Avoid abnormal 
working positions.

Keep your electric tool out of the rain. Never use 
electric tools in wet or damp conditions, and never
use them near inflammable liquids.

Never carry the machine by its power cable. Keep 
the power cable safe from damage. Oil, solvent 
and sharp edges can damage cables.

Keep your workplace tidy.

Make sure the power switch is off before inserting 
the plug in the socket.

Wear suitable clothing. Never wear loose-fitting 
clothes or jewelry. Use a hair-net on long hair.

For your own safety, use only the manufacturer´s 
accessories and attachments.

Vibration measured according ISO 5349.

GB

Anleitung LAG 115  24.10.2001 9:49 Uhr  Seite 3

Содержание Lektro LAG 115









Отзывы: