background image

4

Connecting Other Devices

Unplug the AC power cord from the outlet before 

connecting or disconnecting other devices. Exercise 
caution when handling the AC power cord. When 
disconnecting the AC cord from a socket, make sure 
you pull the plug, and not the cord itself. 

Turning Power On/Off

Your system components should be turned on/off in 

the following order to avoid generating noise from your 
speakers and damaging the speakers themselves or 
other devices: 

□  

Turning power on

: Turn on this appliance before 

turning on the ampli

fi

 er connected to this appliance. 

□  

Turning power off

: Turn off the ampli

fi

 er 

fi

 rst, before 

turning off this appliance. 

Handle With Care

 

Avoid exerting excessive force on the cabinet, the 

switch, the knob, the terminal and the CD-Turntable on 
this appliance. 

Installation

 

Use of an audio rack is recommended to maximize 

the sound quality and performance of this appliance. 
Installation and use of this appliance in the locations 
described below may cause deterioration in sound 
quality or malfunction: 

□ 

 Locations exposed to direct sunlight, such 
as windowsills, and other exceptionally warm 
locations, such as near heating appliances 
(surrounding temperature higher than 35 °C), 
or exceptionally cold locations (surrounding 
temperature lower than 10 °C), may prevent this 
appliance from functioning adequately. 

  Damp locations exceeding 90% humidity may 

cause this appliance’s metal parts to rust, causing 
this appliance to malfunction. 

  Dusty locations may cause this appliance to 

malfunction. The accumulation of dust inside the 
CD tray may lower the performance of music 
signal reading. It may also cause contact failure of 
the switches, and/or noise. 

  Otherwise, avoid installing this appliance close to 

other transformers and electrical motors, so as to 
prevent the pickup of induction hum. Also, avoid 
mounting this appliance on surfaces that may be 
affected by vibration. 

Handling Precautions

Avoid lightning strikes

Disconnect the AC power cord from the AC outlet 

when there is a thunderstorm in your vicinity.

Condensation

When this appliance is brought into a warm room 

when the exterior temperature is cold, or when the 
room temperature rises sharply from using a heater, 
condensation may form both inside and outside this 
appliance, hampering its performance. If this happens, 
leave this appliance unused in the room for 1 to 2 
hours (depending on the amount of condensation), so 
as to bring the temperature of this appliance closer to 
the room temperature. The condensation should go 
away gradually. 

Listening etiquette

Make sure your playback sound, ex. due to too 

big sound, does not disturb other people and your 
neighborhood.

Содержание SuperLink DA SL













Отзывы: