C-DOT DSS MAX, Инструкция по установке и эксплуатации

Страница: 12 / 36

12 C-DOT NSE
Chapter 3.
NSE Packaging Details
3.1. GENERAL
The NSE card cage houses the following four types of cards
a) NSE Controller and PLL Card (NCP212/H-S01)
b) NSE Input/Output Card (NIO 499/H-S00)
c) NSE Display and Keyboard Card (NSD 463/F-O02)
d) NSE Motherboard Card (NSM 462/F-M02)
NCP and NIO form a single block and can be duplicated to operate NSE in duplex
mode of operation. The NCP and NIO cards sit on the NSM in a card cage with the
following order.
NCP copy 0 ------------ slot 1 (top)
NIO copy 0 ------------> slot 2
NIO copy 1 ------------> slot 3
NCP copy 1 ------------> slot 4 (bottom)
The NSD card is mounted on the front panel of the NSE and is connected to
both copies of NCP through 40 pin FRC connector cables.
3.2. FIRMWARE DETAILS
S.No. Device Card Position Checksum
1. EPROM 27C010 NCP U17 AB23
2. EPROM 27C010 NCP U19 2B52
3. EPLD 7128E NCP U56 1B7916
4. EPLD 7128E NIO U22 1A6DC5
5. EPLD 7128E NIO U12 1660D9
6. EPLD 7128E NIO U13 1660D9