C-Dax Pasture Meter, Руководство по сборке и эксплуатации

Страница: 66 / 71

63
Tier 2 Model – Quick Reference Guide
1. Ensure wheels are down for travelling to place of use.
2. Check that sensor glass is clean.
3. Turn on indicator, select “Farm ID” (if enabled) and switch display to show
height in mm.
4. Ensure that the sensor is clear of any interference. The display should
read 10 mm . This confirms that all light beams are functioning correctly.
5. Place hand or object through light beams and note that a height reading
occurs. If any 4 holes are blocked, the reading should be 90mm showing
correct operation.
6. Travel to the paddock to be measured.
7. Lower sled to Measure/Operation position by retracting the wheels (See
FIG 13 & FIG 14, Page 24)
8. Set indicator to now show the desired display. (ie. kgDM/ha or mm)
9. Press the “right cursor” button on the indicator console, select “Paddock
ID” if enabled and proceed along the path to be measured.