C-Dax GM20, Руководство пользователя

Страница: 7 / 17

7
TURFMATE INSTALLATION CONT.
5. Fix the boom frame to the boom mount by sliding through the bracket and fixed using the M8 x 40 screw,
nut and washer supplied. Assemble the boom by pressing the button latch on each arm and sliding the arm
into the boom frame (See the parts diagram for further detail).
6. Assemble the nozzle tips and filters by placing inside each of the boom’s nozzle bodies.
7.
Attached to the tank is a small plastic bag containing a rubber washer and orifice plate. Take these items
and place inside the red bypass tap. Connect this tap to the fitting at the top of the tank.
8.
Connect the two hose ends via the quick coupler.
9.
Please read the Lead-Acid Battery Maintenance leaflet supplied with the unit before filling and charging the
battery.
10.
Once the battery has been filled and charged, take off the pump cover and place the battery in the recess
moulded into the tank. Ensure the battery’s breather is unobstructed. Connect the black wire from the
switch to the negative (-) terminal on the battery. Connect the red wire from the switch to the positive (+)
terminal on the battery. Join the female 2-pin connector from the switch to the male connector on the pump.
Screw the pump cover back on.
NOTE
The Turfmate is supplied with a handgun and 5m of delivery hose, when the gun and hose is not being used,
simply wrap the hose around the handle asy and store the lance in the lance holder mounted to the side of the
tank.
LINEMARKER INSTALLATION CONT.
5. Connect the LineMarker assembly to the boom mount by sliding the through the bracket and fix using the
M8 x 40 screw, nut and washer supplied.
6.
Attached to the tank is a small plastic bag containing a rubber washer and orifice plate. Take these items
and place inside the red bypass tap. Connect this tap to the fitting at the top of the tank.
7.
Connect the two hose ends via the quick coupler.
8.
Please read the Lead-Acid Battery Maintenance leaflet supplied with the unit before filling and charging the
battery.
9.
Once the battery has been filled and charged, take off the pump cover and place the battery in the recess
moulded into the tank. Ensure the battery’s breather is unobstructed. Connect the black wire from the
switch to the negative (-) terminal on the battery. Connect the red wire from the switch to the positive (+)
terminal on the battery. Join the female 2-pin connector from the switch to the male connector on the pump.
Screw the pump cover back on.
TESTING
Plug the battery lead into the pump lead, place water in the tank and switch on the pump using the remote switch
on the handle. Note that the pump primes more efficiently by removing the checkvalve. Reconnect once the fluid
has passed through the pump.
Check for nozzle blockages, air in the inlet hosing (between tank and pump), and water leaks. Tighten hose
clamps and other plumbing fittings as required. When the pump is turned off there should be no drips from the
nozzles.
The pressure gauge may not return to zero with the pump is switched off. The non-drip checkvalves on the boom
do not open unless the pressure in the boom is above 5 to 7 PSI (0.35 to 0.5 Bar), so with the pump off, some
pressure may still be in the tubing from pump to boom.