Company Address: Floor 6, Building F, Songbai Road 1008, Sunshine Community
，
Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
P14
【
Enable NAT
】
Check ‘NAT’ feature;NAT is mainly used for address translation
function of local network and external network. The default is checked enable status.
If you do not check this option, maybe you can’t surf the internet.
【
Service List
】
Check “INTERNET”or“VOICE_INTERNET”;The broadband Internet of
routing mode is usually check the “INTERNET”,the latter supports voice functions.
【
VLAN Type
】
Configure this option according to our network plan.If the network
plans the vlan of broadband Internet, this item needs to choose "tag";If the network
has no vlan planning for broadband Internet access, this option is "untag".
【
Vlan ID
】
This will appear after the selection "tag", and the vlan id of the network
plan should be filled in.
【
MTU
】
The default is 1492; if we can ping the DNS but not access to the website
via WEB browser, we need to lower the value of MTU, such as 1400.
【
IP Address
】
Set static IP address;
【
Subnet Mask
】
Set the mask of static IP address;
【
Default Gateway
】
Set the default gateway of static IP address;
【
DNS1
】
Set static primary DNS address and secondary DNS address;
【
DNS2
】
Set static second DNS address and secondary DNS address;
【
DNS3
】
Set static third DNS address and secondary DNS address;
Note:
the default port is unbound, and all the LAN ports go through this WAN.
When the device has a bridge WAN and a route WAN at the same time,it needs to
bind the port for each WAN (a LAN can only be bound to a WAN, can not bind to
multiple WAN connections at the same time.
）
.
2.
After configuring the parameters of Static WAN connection as below, click ‘
Create
’ to
finish the setting
：
