BZBGEAR BG-EXUF
PRODUCT MANUAL
Operation Controls and Functions
Transmitter Panel
No.
Name
Function Description
1
Power LED
The green LED will Illuminate when connected to DC power.
2
USB 2.0:
The LED light will illuminate when the transmitter is connected to a USB 2.0 computer. If
connected to a USB 3.0 computer, the LED light will be off.
Note:
When the transmitter is connected to a USB 2.0 computer, the receiver device can only
be connected to one camera.
3
LINK
The green LED will Illuminate when the transmitter and receiver have a good connection status.
4
Optical OUT
Connect to “OPTICAL IN” port on receiver via fiber cable.
5
HOST
Connect to the host computer device.
6
DC 12V
Connect to the DC12V power adapter.
Receiver Panel
No.
Name
Function Description
1
Power LED
The green LED will Illuminate when connected to DC power.
2
Devices
The green LED will Illuminate when connected to a KVM device.
3
LINK
The green LED will Illuminate when the transmitter and receiver have a good connection status.
4
RESET
Press and hold this button for 3 seconds to restore factory defaults.
5
Optical IN
Connect to the “OPTICAL OUT” on the transmitter using a fiber cable.
6
Devices
Connect to KVM devices.
7
DC 12V
Connect to the DC12V power adapter.
Tech Support
Have technical questions? We may have answered them already!
Address:
830 National Drive #140, Sacramento, CA 95834, USA
·
Tel:
+1(888)499-9906
·
Email:
7
