BZBGEAR BG-EXH-70C3
PRODUCT MANUAL
R
ECEIVER
P
ANEL
Name
Function Description
SERVICE
Firmware update port.
HDMI OUT
HDMI signal output port. Connect to the HDMI display devices using an HDMI cable.
TOSLINK
Optical fiber audio output port. Connect to the amplifier, receiver, or speaker with an optical cable.
CAT IN
RJ45 port to connect to the CAT OUT port of the transmitter using a CAT6/6a cable.
Link Signal
Indicator
(Green)
Solid: The transmitter and receiver have a good connection status.
Flashing: The transmitter and receiver have a poor connection status.
Dark: The transmitter and receiver are not connected.
Data Signal
Indicator
(Orange)
Solid: HDMI signal with HDCP.
Flashing: HDMI signal without HDCP.
Dark: No HDMI signal.
IR IN
Connect to the IR receiver cable. The IR receive signal will emit to the IR OUT port of the transmitter.
IR OUT
Connect to the IR blaster cable. The IR will emit a signal from the IR IN port of the transmitter.
DC 12V
DC 12V/1A power input port.
Note:
The extender supports PoC functionality. Either the transmitter or receiver must be connected to
a 24V/1A power supply. The other does not require a power supply.
EDID DIP
switch
Use the DIP switches to control ARC function. Switching to the upper end indicates 1; switching to
the lower end indicates 0. Note that only the left switch is used.
1X - Enable the ARC function
0X - Disable the ARC function
Address:
830 National Drive #140, Sacramento, CA 95834, USA
·
Tel:
+1(888)499-9906
·
Email:
8
