13
7.2 RS232 Command
Note: All commands need to be
ended with “<CR><LF>”.
7.2.1 Device Control
Command
Description
Command Example and Feedback
#GET_FIRMWARE_VE
RSION
Get the software version.
@V1.0.0
#SET_KEYPAD_LOCK
0
Unlock the front panel
buttons (Factory default).
@FRONT PANEL UNLOCK!
#SET_KEYPAD_LOCK
1
Lock the front panel buttons.
@FRONT PANEL LOCK!
#GET_KEYPAD_LOCK
Get the locking status of
front panel buttons.
@FRONT PANEL UNLOCK!
@FRONT PANEL LOCK!
#SET_HDMI_DETECTI
ON_MODE 0
Set the detection method of
HDMI source input to 5V.
@INPUT_SIGNAL_DETECTION 0!
#SET_HDMI_DETECTI
ON_MODE 1
Set the detection method of
HDMI source input to
TMDS.
@INPUT_SIGNAL_DETECTION 1!
#GET_HDMI_DETECTI
ON_MODE
Get the detection method of
HDMI source input.
@INPUT_SIGNAL_DETECTION 0!
@INPUT_SIGNAL_DETECTION 1!
#GET_STATUS
Get the system status.
@RS232 QUERY STATUS!
@B
G
-UHD-KVM41-KIT
@V1.0.0
@FRONT PANEL UNLOCK!
@HDMI OUT SWITCH TO AUTO MODE!
@HDMI IN SWITCH TO 1!
@OUTPUT_HDCP 0!
@INPUT_SIGNAL_DETECTION 1!
@IIS OUT ON!
@RS232 BAUDRATE IS 1!
#FACTORY_RESET
Restore factory default
@FACTORY DEFAULT!
@B
G
-UHD-KVM41-KIT
@V1.0.0
@HDMI OUT SWITCH TO AUTO MODE!
@OUTPUT_HDCP 0!
@IIS OUT ON!
@INPUT_SIGNAL_DETECTION 0!
@HDMI IN SWITCH TO 1!
@USB SWITCH MODE TO 0!
@RS232 BAUDRATE IS 1!
