6
3. Application Instruction
3.1 Remote Controller
3.1.1 Keys Instruction
1. Standby Key
（
not supported currently
）
After 3s long press, the camera will be in standby mode. Long press 3s again, the
camera will self-test again and back to HOME position. Note: If preset 0 is set, there
is no operation within 12s, camera head will automatically point to the specified
preset 0 position.
2. Camera Address Selection
Select the camera address
3. Number Key
Set or call 0-9 presets
4. *, # Key
Key combination use
Long Press 5s
“SET” + “
*
” at the same time, the WR controller is light on, releases
hands. Power on the camera again, it will successfully paired with WR controller.
Long Press 5s
“SET” + “
*
” at the same time, the WR controller is light on, releases
hands. Power on the camera again, it will cancel to paired with WR controller.
5. Focus Control Key
Auto Focus: Enter into auto focus mode.
Manual Focus: The camera focus mode is manual
Switch the camera focus mode to manual focus by pressing [focus +] or [focus -] to
adjust.
6. Zoom Control Key
Zoom
＋
: Lens near
Zoom
－
: Lens far
7. Set or Clear Preset key
:
Set Preset: Set preset key + 0-9 number key
Clear Preset key: Clear preset key + 0-9 number key
8. Electronic Pan/Tilt Control Key
Press Key : Up
Press Key : Down
Press Key : Left
Press Key: Right
“HOME” Key: Return to the middle position or enter into the sub-menu
9. BLC Control Key
Back Light ON / OFF: Turn on or off the back light
10. Menu Setting
Open or close the OSD menu