4
1. Quick Installation
1.1 Camera Interface Description
Figure 1.1 Interface
1.
Camera Lens 6. RS232 Control Interface (output)
2.
Remote Controller Receiver Light 7. RS232 Control Interface (input)
3.
Camera Base 8. RS485 Input (left +, right-)
4.
Tripod Screw Hole 9. USB2.0 Interface
5.
Mounting hole 10. DC12V Input Power Supply Socket
1.2 Power on initial configuration
1) Power on: Connect DC12V power supply adapter with power supply socket.
2) Initial configuration: Power on with power indicator light on and remote control receiver light blinking, camera
head moves from bottom left to the bottom, and then goes to the HOME position (intermediate position of both
horizontal and vertical), while the camera module stretches. When remote control receiver light stops blinking,
the self-checking is finished
Note: If you set preset 0, when Power on self-test is completed, the camera automatically moves to the preset 0
position.
1.3 Video Output
This model supports USB2.0 video output.
Connect camera and computer by USB2.0 cable, choose video conference software for image.
