3
DIP switch configuration
Please read these instructions carefully
before powering on your system with the DivMMC EnJOY!
DIP switch overview
4
On: ZX Spectrum 128K+ (toastrack)
Off: other
3
On: ZX Sp2A/+2B/+3
Off: other
2
On: Joystick enabled
Off: Joystick disabled
1
On: Normal operation
Off: Flash (programming) mode
ZX Spectrum selection –
switches 3 & 4
ZX Spectrum
16K, 48K, 48K+ or (grey) +2:
ZX Spectrum
128K ‘toastrack’ model*:
ZX Spectrum
+2A, +2B or +3:
* Some ZX Spectrum 128K ‘toastrack’ models seem not to need switch 4 enabled. If you are using a
ZX Spectrum 128K ‘toastrack’ and you are getting ‘tape loading errors’, disable switch 4.
Joystick interface configuration –
switch 2
When combining the DivMMC EnJOY! with another interface that also has a Kempston joystick port,
you can disable the internal joystick port on the DivMMC EnJOY!
Enable the joystick interface:
Disable the joystick interface:
