AM Radio mode
Tuning to an AM station
In AM mode:
Use the rotary tuning dial on the front of the radio to tune to your favourite AM station.
Please use the frequencies marked on the dial as a guide.
The tuning dial will move both clockwise and anti-clockwise but does have a ‘stop’ point.
If you turn the tuning dial and reach the ‘stop’ point, please turn the dial in the opposite
direction to tune.
Note:
If reception is still poor, check that the aerial is fully extended and then adjust the
tuning dial slowly, or try moving the Radio to another location.
Slide the function switch to the AM position, the FM indicator LED (7) will be on.
Bluetooth operation
1. Slide the function switch to the BT position, the blue indicator LED (8) will begin to flash.
3. Select the Bluetooth pairing name ‘Gaumont’ or ‘AM29’ to connect to the Radio device.
4. Once you are connected the blue indicator LED will stop flashing, you can now play music.
2. Turn your devices Bluetooth setting on, and search devices.
The devices are now connected and will hear a voice prompts ‘Bluetooth
connected successfully’.
After initial pairing the Radio device will stay paired to your device.
Note:
To unpair, you need to manually remove it from your Bluetooth device.
and will hear a voice prompts 'Bluetooth disconnected'.
Using earphone (not included)
You can connect earphones with a 3.5 mm plug to the radio, plug in the earphones into the
Warning!
Ensure that children don’t adjust the sound volume too high.
Excessive sound pressure from earphones and headphones can cause hearing loss.
Note:
When you have earphones connected the radio speakers (11) are switched off and all
sound is via the earphones
earphone jack 3.5 mm (2) on the backside of the radio.
Adjust a pleasant sound volume, the radio speaker (11) will be muted as long as earphone
is connected
6