C H Byron
34, Sherwood Rd
Aston Fields
Bromsgrove
B60 3DR
Contact Details:
433MHz
R&TTE
APPROVED
CH Byron Electrical United Kingdom. www.chbyron.com
A
B
DK
FIN
F
D
GR
LT
IRL
I
L
NL
P
E
S
UK
BG
CZ
EST
H
IS
LV
M
N
SK
SLO
CH
PL
RO
0560
Tel: 0845 2301231
Fax: 01527 557701
Web: www.chbyron.com
E-mail:
Help:
Occasionally interference from receiver sockets plugged into adjacent wall
sockets or when used with transformers (low voltage products) can affect the
operating range.
Try placing one of the receiver sockets in another wall socket. For low voltage
products place the transformer as far away form the receiver socket as possible.
Contact:
Helpline: 0845 2301 231
TIMBER
CONCRETE
METAL
GLASS
PLASTICS
RF Range:
:
The radio signals operating distance is reduced when the signal has
to pass through walls. The radio signals achieve a range of 30m inside a building;
this can be reduced depending on the type of material
10 - 15%
BRICK
10 - 40%
40- 80%
10 - 40%
90%
5 - 15%
Range
Reduction Guide:
Switching On/Off /Dimming:
Help Section :
Product Specification:
Switch Converter: HE-203
Power: 230V ~50Hz
Max Load 210W (Incandescent Lighting)
Internal Fuse: 2A, 130 degrees Celsius
Range: 30 Metres (Open Distance)
Frequency: 433.92MHz
Indoor Use Only
Warning:
Never Exceed the Product Specification
OFF
ON
Remote Control:
On:
Press on button
OFF:
Press Off button
(See pairing/deleting with remote control)
1
2
Remote Socket reset:
To delete all the remote control units from the memory of the receiver socket,
hold the "Learn" button for more than 6 seconds, the LED will start to blink
continuously. Press the learn button again, the LED will blink twice to confirm
the deletion of all remote controls form the receiver memory.
Dimming:
Press "On" and then press "On" again, the converter unit will now
start to dim, press "On" to select the required level. To switch "Off", press off
as normal.
Standard Light Switch:
On/Off:
Switch on and off as normal.
Dimming:
Switch On, Off and On again. The converter will now start to dim, to
select the required level switch the light Off and On.
