C H Byron
34, Sherwood Rd
Aston Fields
Bromsgrove
B60 3DR
Contact Details:
433MHz
R&TTE
APPROVED
CH Byron Electrical United Kingdom. www.chbyron.com
A
B
DK
FIN
F
D
GR
LT
IRL
I
L
NL
P
E
S
UK
BG
CZ
EST
H
IS
LV
M
N
SK
SLO
CH
PL
RO
0560
Tel: 0845 2301231
Fax: 01527 557701
Web: www.chbyron.com
E-mail:
Contact:
Helpline: 0845 2301 231
HE200 Programable Remote Control:
Display Functions:
Functions:
1: 12 Programmable Memory Spaces
2: 24Hr Time
3: Timer Setting "On"
4: Timer Setting "Off"
5: Security Mode
6: Timer Mode - Single Timer Setting
7: Timer Mode - Daily Timer Setting
8: Low Battery Warning
9: Unit Code Display
10: Transmission Indicator Signal
Receiver Select
Switch "On" Selected Receiver
Switch "Off" Selected Receiver
Clock Setting
Program Timer/View
Enter
Delete/Pause
Select Up/Down
The HE-200 Remote Control Timer can be paired to 16 separate
receiver units, select the unit code by pressing the unit button.
Unit Setting:
The HE-200 comes with a preset to Group code A. When
using additional remote control timers you will need to
select a new group code.
To select a new group code, remove the battery cover and
using a small screw driver, rotate the group dial to a new
setting e.g. Group B
G
I
K
+
_
Remove the battery cover form the back of the remote control.
The HE-200 includes 2 batteries:
LCD Display: 1 x CR2032 -Byron SX100 (Included)
RF Transmission: 1 x 23A - Byron SD100 (Included)
Remove the required battery and replace
with new, making sure the polarity matches
the internal markings.
Changing Batteries:
Switching On/Off :
1.
Select the unit by
pressing the "unit"
button until the
correct number is
displayed on the
screen.
2.
Press the "On"
button, the receiver
socket will switch on.
Never exceed
3000W Combined
maximum load.
3.
Press the "Off" button to switch the receiver unit off.
Setting Clock
The remote control displays the time in a 24hr format, to set the time.
1.
Press and hold the
clock button for +3sec.
The hrs will now start
to flash
2.
Use the
buttons to select
the hours and
press Enter.
3.
The minutes will now start to flash, set using the up and down arrows to
select the minutes and then press enter.
Up to Six remote control units can be paired with each HE440 Accessory
Output Channel. To program a channel press the "Learn" button e.g.
accessory output channel 1.
Deleting Remote Control:
To delete a remote control that has been paired with a Accessory Output
Channel, simply press the "Learn" button . The LED will start to blink; press the
"Off" button on the remote control, the LED will blink twice to confirm that the
remote control has been removed from the receiver sockets memory.
Channel reset:
To delete all the remote control units from the memory of the Accessory
Output Channel, hold the "Learn" button for more than 6 seconds, the LED will
start to blink continuously. Press the learn button again, the LED will blink
twice to confirm the deletion of all remote controls form the receiver memory.
Pairing/Deleting with Remote Control:
Accessory Ouput
Channel 1
Learn
Button
LED
The LED will start to flash,
now press the "ON" button
on the remote control, the
LED will stop flashing and the
acessory output will switch
"ON/OFF".
The units are now paired
together, you can test this by
pressing the selected
"ON/OFF" button
Setting Timer :
The HE-200 remote control timer can store up to 12 different timer
programs, ideal for switching on lights throughout the home for added
security.
To program the remote control:
1.
Press and hold the "Timer" button for 3 seconds, the
display will show the 12 available memory spaces. Use
the arrows keys to select a memory space, the display
will also show any programmed times already saved.
Press "Enter" to select the program space.
2.
Press and hold the "Timer" button for 3 seconds, the
display will show the 12 available memory spaces. Use
the arrow keys to select a memory space, the display will
also show any programmed times already saved.
Press "Enter" to select the program space.
3.
The start or On time will start to flash, use the arrow keys to select the hours
and press enter to select the min.
Now select the finish or off time.
4.
Finally select the program mode using the arrows keys and press enter to
confirm.
Daily Timer Setting: Activates the program daily
Security Setting: Selecting the security mode will switch the
receiver units "On/Off" randomly through out the set time.
On = between 40Min - 2Hrs
Off = between 40Min - 3Hrs
Single Timer: Activates the program for a single time only.
Always refer to the original instruction when using with additional
products
5.
Press Timer to exit the setting mode
