Byron DIC-24112, Руководство пользователя

Страница: 14 / 68

7 | Frequently asked questions Smartwares
14 DIC-24112
7 Frequently asked questions
Problem Solution
– Monitor does not switch on. – Make sure that the monitor is connec-
ted to the power source.
– Do not use extension cords, as the
voltage might not be suffcient to
power on the device.
– Monitor is switched on but no image
is displayed.
– The picture quality is not good.
– Check the wire connections between
the outdoor unit and the monitor (in-
cluding the correct polarity).
– Adjust brightness and contrast in set-
tings menu.
– Make sure there is no direct light
source pointed at the monitor.
– The volume is too low. – Adjust the volume
– Connected gate opener does not
work.
– Test the installation and the 12 V relay
using wired control. Refer to the in-
struction manual of the gate opener.
– Connected gate opener and electric
strike does not work.
– Use suitable accessories with 12 V,
500 mA specifcation. Only install lock
having a mechanical storage system.
– Video and audio signal is too weak or
with interference
– The monitor is installed too close to
other electronic devices. Move other
electrical devices away.
– Please check the distance between in-
door unit with outdoor unit, and also
check the thickness of the cables
used,
– There is no sound coming from the
outdoor unit.
– The microphone might be obstructed
or stained. Clean it carefully with a
soft moistened cloth.