PARTS
Before assembling the trampoline, take all of the parts from the packing and check if all the listed bellow are present.
Keep the packages until you completely finish the assembly.
Warning!
Risk of suffocation. Keep the packages away from children. The packages are not toys.
See
Figure PD: SN
– safety net;
P
– tubes for attaching the safety net;
L
– legs;
LA
– ladder;
SC
– spring cover;
JM
– jumping mat.
1. 6ft
– Size of the assembled product:
Frame diameter: 6ft (1.83m); Frame height: 50 cm; Height of the safety net: 163 cm.
2. 8ft
– Size of the assembled product:
Frame diameter: 8ft (2.44m); Frame height: 68 cm; Height of the safety net: 163 cm.
3. 10ft
– Size of the assembled product:
Frame diameter: 10ft (3.04m); Frame height: 76 cm; Height of the safety net: 183 cm.
SIZE OF THE TRAMPOLINES, FOR WHICH THIS MANUAL IS APPLIED
Marking
Description
Qty for 6ft
Qty for 8ft
Qty for 10ft
NJ01
Top Rails
6
6
6
NJ02
Legs (base)
3
3
3
NJ03
Vertical Leg Extensions
6
6
3
NJ04
Spring Cover
1
1
1
NJ05
Jumping Mat
1
1
1
NJ06
Galvanized Springs
36
48
60
NJ07
Safety Net
1
1
1
36.Learn fundamental bounces and body positions thoroughly before starting to use the trampoline.
37.Climb on or off the trampoline. Do not enter with a jump.
38.Do not use the trampoline as jump board to other places.
39.Avoid bouncing too high. Maintain control. The misuse of the trampoline is dangerous and can lead to serious
injuries.
40.Use carefully the trampoline. Trampolines are bouncing devices, with which the user reaches unusual heights
through various movements.
41.Use the product as described in this manual.
42.The user must be aware of their own limitations in regards to performing various jumps and bounces.
43.Do not use the trampoline in rain or stormy weather, especially during thunderstorms.
44.It is recommended to disassemble the trampoline and store it if the weather conditions are bad.
45.Try to avoid moving the assembled trampoline as it may bend during transportation. if relocation is required,
at least 4 people, at a distance equal to one another, should lift the
trampoline’ frame. It must be carried
horizontally.
13
ASSEMBLY STEPS
•
WARNING!
THE SCHEMES AND FIGURES IN THIS INSTRUCTION ARE FOR ILLUSTRATIVE PURPOSES
ONLY AND THE PRODUCT YOU HAVE BOUGHT MAY DIFFER FROM THEM.
•
NOTE!
Two adults in good health must assemble the product.
•Wear gloves and proper clothes and shoes to ensure your safety during the assembly.
•Keep all the packages until you completely assemble the product and make sure there isn’t any part left inside
them. Afterwards throw them away in the designated place.
1.Step 1
– See Figure 2:
Attach the top rails to each other to form a circle. The narrow end of one of tubes
enters the wider end of the other tube. You will need help from another adult to connect the last 2 rails. One of
you must hold the opposite side, while the other connects the two ends.
2.Step 2
– See Figures 1 and 3:
Attach the extensions to the legs.
3.Step 3
– See Figure 3 – 1:
Connect the legs (base) to the already assembled frame for the springs. One adult
must hold the frame in vertical position and in the same time with his other hand to connect an extension of the
first leg to the first socket. The other adult holds the other extension of the first leg and connects it to an adjacent
socket of the frame.
4.Step 4
– See Figures 4, 4-2 and 4-3: Warning!
During the spring assembly,
Содержание NJ-BIG10
Страница 2: ...ЧАСТИ PARTS 1 СТЪПКИ НА СГЛОБЯВАНЕ ASSEMBLY STEPS 3 1 ...
Страница 3: ...2 ...
Страница 4: ...3 УПОТРЕБА РАЗРЕШЕНИ И ЗАБРАНЕНИ СКОКОВЕ USE ALLOWED AND NOT ALLOWED JUMPS ...
Страница 5: ...4 ...