7
Connect the power supply and the tubing as listed for the first use (see above).
Connect the mask and the headgear according to the Mask User Manual
(provided separately).
6.2.2 Adjust the Tubing
Adjust the tubing to make sure the tubing can move freely when the user is in a
deep sleep. Adjust the mask and the headgear to make the user feel as
comfortable as possible and prevent air from blowing into the user’s eyes.
6.2.3 Start the Device Running
Press the On/Off Button. The device will begin to run and therapy data (such as,
air pressure and temperature) will be shown on the display screen.
6.2.4 Humidifier Heating
If using the humidifier, it is recommended that the unit be used with the tubing
which provided by BEYOND Medical to prevent leakage. If the humidifier is
attached to the device but the user does not want to use the humidifier, turn the
humidifier off.
6.2.5 Ramp Function
When using the Ramp Function, the device will begin at a low initial pressure
and increase to the desired pressure setting in a steady rise over the time period
selected by the user. After this function is selected, press the On/Off Button
once, the device will start to run in accordance with the Ramp Function’s
settings. If the On/Off Button is pressed a second time, the device will cancel
the Ramp Function and run at the selected pressure.
6.2.6 Turn Off the Device
When the mask is taken off, the device will stop running. The user then needs to
turn off the device by unplugging the power supply.
7. Humidifier
In drier regions, prolonged use of the device may dry out the user’s nasal
passages, causing discomfort. This device is equipped with a humidifier to
address this issue. When water is added to the humidifier and it is turned on,
moisture will be added to the inhaled air to moisten the user’s nasal passages.
7.1 Humidifier Composition
Fig.7.1
1
Air Outlet
