Byomic Dobson Telescope SkyDiver 102/640
ASSEMBLY INSTRUCTIONS
CAUTION: NEVER POINT YOUR TELESCOPE
AT THE SUN. VIEWING THE SUN WITH
THIS TELESCOPE OR EVEN THE UNAIDED
EYE CAN RESULT IN BLINDNESS OR OTHER
SERIOUS EYE DAMAGE.
1.
REMOVE ALL PARTS FROM BOX AND IDENTIFY THEM.
TELESCOPE
MOUNT(NEEDS TO BE ASSEMBLED)
ELECTRONIC RED DOT FINDER
EYEPIECES (F20MM & F6MM)
3X BARLOW
M6x25 SCREWS AND M6x30 SCREWS
LOCKING KNOB
WASHERS (PLASTIC METAL SPRING WASHER)
2. ATTACH SIDE SUPPORT
3. ATTACH ACCESSORY HOLDER
TO SIDE PANEL WITH 2PCS
TO SIDE PANEL WITH
M6x30 SCREWS
2PCS M6x25 SCREWS
4. ATTACH SIDE PANEL TO TOP
5. PLACE TOP PORTION OF BASE
PORTION OF BASE WITH 3PCS
ONTO THE BOTTOM PORTION
M6x30 SCREWS
OF THE BASE
5
