BYOC Echo Royal, Инструкция по эксплуатации

Страница: 6 / 29

6
2 - DIP8 sockets
2 - DIP14 sockets
3 - DIP16 sockets
Transistors:
1 - 78L05
3 - 2N3904
4 - 2N5457 (or 2N5458, J111, J112, J113)
1 - 2SK246
Potentiometers:
SNAP OFF THE SMALL TABS ON THE TOP OF THE POTS OFF WITH A
PAIR OF NEEDLE NOSE PLIERS. IF YOUR POTS HAVE COVERS, REMOVE THEM BEFORE
CONTINUING. YOU MIGHT HAVE TO CUT A SLIT IN THE COVER WITH A BLADE AND
USE A SMALL SCREWDRIVER TO GET LEVERAGE.
1 - B10k MIX
1 - B50k DELAY
1 - B50k Solder Lug TAP MULTIPLIER
2 - B100k DEPTH, REPS
1 - C500k RATE
1 - 50k Trimpot
Hardware
:
1 - predrilled enclosure w/ 4 screws
1 - Echo Royal Printed Circuit Board
2 - momentary footswitch
3 - Enclosed jacks
4 – rubber bumpers
3 – lock washers (for in and out jacks)
hook-up wire
Your kit will come with mostly 1/8 watt resistors. If you receive ¼ watt resistors,
simply bend them so the body is vertical on the PCB. Below is an example