BYOC Classic Compressor Kit Скачать руководство пользователя страница 1

Страница: 1 / 30

Build Your Own Clone

Classic Compressor

Kit Instructions

Warranty:

BYOC, LLC guarantees that your kit will be complete and that all parts and components

will arrive as described, functioning and free of defect. Soldering, clipping, cutting,

stripping, or using any of the components in any way voids this guarantee. BYOC, LLC

guarantees that the instructions for your kit will be free of any majors errors that would

cause you to permanently damage any components in your kit, but does not guarantee

that the instructions will be free of typos or minor errors. BYOC, LLC does not
warranty the completed pedal as a whole functioning unit nor do we warranty any of the

individual parts once they have been used. If you have a component that is used, but

feel it was defective prior to you using it, we reserve the right to determine whether or

not the component was faulty upon arrival. Please direct all warranty issues to:

[email protected] This would include any missing parts issues.

Return:

BYOC, LLC accepts returns and exchanges on all products for any reason, as long as

they are unused. We do not accept partial kit returns. Returns and exchanges are for the

full purchase price less the cost of shipping and/or any promotional pricing. Return

shipping is the customers responsiblity. This responsibility not only includes the cost of

Содержание Classic Compressor Kit






























Результаты поиска

Содержание Classic Compressor Kit

Отзывы:

Похожие инструкции для Classic Compressor Kit

Бренды по названию

Популярные бренды

BYOC Classic Compressor Kit, Инструкция по эксплуатации

Результаты поиска

Содержание Classic Compressor Kit

Отзывы:

Похожие инструкции для Classic Compressor Kit

Бренды по названию

Популярные бренды