background image

 

Build Your Own Clone 

Amp Selector and Stereo FX Router 

Kit Instructions 

 

 

Warranty: 

BYOC, Inc. guarantees that your kit will be complete and that all parts and 
components will arrive as described, functioning and free of defect.  Soldering, 
clipping, cutting, stripping, or using any of the components in any way voids this 
guarantee.  BYOC, Inc. guarantees that the instructions for your kit will be free of 
any major errors that would cause you to permanently damage any components in 
your kit, but does not guarantee that the instructions will be free of typos or minor 
errors.   BYOC, Inc. does not warranty the completed pedal as a whole functioning 
unit, nor do we warranty any of the individual parts once they have been used.  If 
you have a component that is used, but feel it was defective prior to you using it, we 
reserve the right to determine whether or not the component was faulty upon 
arrival.  Please direct all warranty issues to: 
[email protected]  This would include any missing parts issues

 

Return: 

BYOC, Inc. accepts returns and exchanges on all products for any reason, as long  as they 
are unused.  We do not accept partial kit returns.  Returns and exchanges are for the full 
purchase price less the cost of shipping and/or any promotional pricing.  Return shipping 
is the customer’s responsibility.  This responsibility not only includes the cost of 
shipping, but accountability of deliver as well.  Please contact 
[email protected] to receive a return authorization before mailing. 
 

Содержание Amp Selector and Stereo FX Router
























Отзывы: