Safety data sheet
Elektrolyt C
Material no.: 2020 DC / 2021 DC / 2025 DC
According to 1907/2006/EC (REACH), 453/2010/EC
SECTION 6: ACCIDENTAL RELEASE MEASURES (continue)
See sections 8 and 13.
Reference to other sections:
6.4
Absorb the spillage using sand or inert absorbent and move it to a safe place. Do not absorb in sawdust or other combustible
absorbents. For any concern related to disposal consult section 13.
It is recommended:
Methods and material for containment and cleaning up:
6.3
This product is not classified as dangerous to the environment. Keep product away from drains, surface and underground water.
Environmental precautions:
6.2
Isolate leaks provided that there is no additional risk for the people performing this task. Personal protection equipment must be used
against potential contact with the spilt product (See section 8). Evacuate the area and keep out those who do not have protection.
SECTION 7: HANDLING AND STORAGE
Maximum time:
12 Months
Maximun Temp.:
25 ºC
Minimum Temp.:
5 ºC
Technical measures for storage
A.-
7.2
Conditions for safe storage, including any incompatibilities:
It is recommended to have absorbent material available at close proximity to the product (See subsection 6.3)
Technical recommendations to prevent environmental risks
D.-
Do not eat or drink during the process, washing hands afterwards with suitable cleaning products.
Technical recommendations to prevent ergonomic and toxicological risks
C.-
Product is non-flammable under normal conditions of storage, manipulation and use. It is recommended to transfer at slow speeds
to avoid the generation of electrostatic charges that can affect flammable products. Consult section 10 for information on
conditions and materials that should be avoided.
Technical recommendations for the prevention of fires and explosions
B.-
Comply with the current legislation concerning the prevention of industrial risks. Keep containers hermetically sealed. Control spills
and residues, destroying them with safe methods (section 6). Avoid leakages from the container. Maintain order and cleanliness
where dangerous products are used.
Precautions for safe manipulation
A.-
7.1
Precautions for safe handling:
Except for the instructions already specified it is not necessary to provide any special recommendation regarding the uses of this
product.
7.3
Specific end use(s):
Avoid sources of heat, radiation, static electricity and contact with food. For additional information see subsection 10.5
General conditions for storage
B.-
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Substances whose occupational exposure limits have to be monitored in the work environment
8.1
Control parameters:
Environmental limits
Identification
2014
Year
EC: 231-633-2
2 mg/m³
IOELV (STEL)
CAS: 7664-38-2
1 mg/m³
IOELV (8h)
Phosphoric Acid
DNEL (Workers):
Local
Systemic
Local
Systemic
Identification
Long exposure
Short exposure
1 mg/m³
Non-applicable
2 mg/m³
Non-applicable
Inhalation
EC: 231-633-2
Non-applicable
Non-applicable
Non-applicable
Non-applicable
Dermal
CAS: 7664-38-2
Non-applicable
Non-applicable
Non-applicable
Non-applicable
Oral
Phosphoric Acid
Date of compilation: 2014-11-19
Version: 1
Page 3/9
- CONTINUED ON NEXT PAGE -
