BYD COMPANY LIMITED
Rev. 21.12 2018
Document
Installation Manual and User Manual for BYD
Project No.
\
Code
2M SOP0007540
Edition
13
Page
5 / 30
5
read this manual carefully before installing and using the modules.
Please get in touch with the provider if you have any questions.
This manual applies to all the standard modules of BYD Company
Limited.
Keep this guide in a safe place for future reference (care and
maintenance) and in case of sale or disposal of the modules.
NOTE:
All statements in this manual refer to our 3 or 4bus-bar
polycrystalline cell PV modules .The illustrations in this manual,
which show 2
or 3
bus-bar cell PV modules, are only used for
reference purposes.
1. Product identification
1.1 Label
The label shows the product type, rated power, rated current, rated
voltage, open circuit voltage, short circuit current, weight, dimensions
etc.;
1.2 Barcode
Each module has only one bar code as shown below:
FIG.1 Bar code
SH 130701 P630 ASEC 001
SH
——
Manufacturer location, SH:Shanghai; SA:South Africa
SL:Shangluo; TS:Tangshan Haitai; VN:Vietnam; RX:Ruixin; BR:Brazil;
RD:Runda; GL:Guolong
（
Dingxinsheng
）
;ST:Santaicheng;
130701
——
Date
（
YYMMDD
）
;
P
——
P for Poly -Si
，
M for Mono-Si; L for Mono-like
6
——
6 for the cell dimension of 156*156
，
5 for the cell dimension
of 125*125mm, 7 for the cell dimension of 156.75*156.75; H for the cell
dimension of 156.75*78.375mm
30
——
the voltage of the modules;
ASEC-
——
Engineering Code ,for different shifts, materials etc;
001
——
Number of product components,3 digit sequence 0 to 999
for sequential production starting on each new day of production at 001.
2. Transportation and storage manual
Please observe the following criteria after packing:
(1)
Don’t tilt the packing boxes for more than 15° during handing.
(2)
Please follow the instruction labels “up” and “down” during
