BYD ECB16, Руководство оператора

Страница: 75 / 116

ECB16 ECB18
65 OM-ECB162015006-EN-US
DANGER
1. When lifting the forklift by crane, do not allow anyone to enter into the working area of
the crane.
2. Never use the tow pin opening on the counterweight to crane-lift the forklift.
WARNING
1. Use only a crane with sufficient loading capacity (See the data plate on the forklift)
2. Crane slings should be fastened in such a way that they do not come into contact with
any part of the forklift when lifting.
3. Use only strong enough crane slings.
Driving into the Transport Truck
Always drive the forklift into the transport truck on turtle speed mode.
CAUTION
1. Have a supervisor or a second person on site as a lookout.
2. Make sure that the ground is strong enough to avoid the transport truck sinking into the
floor.
3. The ramp should be able to withstand the weight of the forklift and be secured to the
transport truck or the truck.
4. During loading and unloading, constantly check the rigidity and the stability of the ramp.
Transporting and Unloading the Forklift
1. Use a transport truck or a low flat bed truck to transport the forklift.
2. During transportation, the handbrake must be applied. Secure the wheels with wedges to
ensure that the forklift will not slip during transporting.
3. Dismantle the forks before transportation. The dealer will install the forks depending on
the customer requirements after arrival.
4. Unloading the forklift by crane follows the same procedure as the loading of the forklift.
5. When driving the forklift out of the transport truck, reverse the forklift with caution at low
speed. The rest of the procedure is the same as required for driving the forklift onto the
transport truck.
https://www.forkliftpdfmanuals.com/