BYD BYD5030XXYBEV2, Руководство пользователя

Страница: 174 / 252

174 6-1 A/C System
By pressing button, the defrosting and demisting function will be activated.

The air inlet mode will be automatically switched to the external air recirculation mode,
and the compressor will be turned on and off automatically. When the temperature is
set to Lo or Hi, the A/C blower speed is set to level 7 by default (to allow quick
defrosting and demisting) and for any other set temperature, the A/C blower speed is
set to level 5 by default.

By pressing this button again, the air supply mode will return to the status used last
time.
Air flow direction regulation, opening and closing of air vents
Operate
C on the blade at vent to guide the
air flow to the left/right side or the
upper/lower side; turn
D below vents on the
left/right side to open or close air vents.
Main Points of Operation for A/C System

To allow the interior of the vehicle to cool down after sun exposure, open the windows
for a few minutes to remove hot air inside and accelerate cooling inside the vehicle.

Make sure that the air intake grille in front of the windscreen is not blocked (by leaves
or snow).

In damp environment, do not direct cold air to the windscreen directly to prevent the
windscreen from misting due to inconsistent inside and outside temperatures.

Be sure to keep the part under front seats open and unblocked, so that the air inside
the vehicle can be fully circulated.

In cold weather, the blower speed must be set to a high value for continuous working
of 1 min to clear the accumulated snow or moisture at the air inlet, so that window
misting can be reduced.

When following other vehicles on a dusty road or driving in a windy and dusty
environment, close all windows, set the air inlet mode to internal air recirculation mode
and turn on the A/C blower.