BYD B-Box H, Руководство по установке, Страница: 19 / 23

B-Box H Installation Guidance
19
/
23
8System Boot
Note: Before activating the system, please inspect the following items:
Confirm the inverter is not connected reversely;
Ensure reliable connection of communication line between battery and inverter.
8.1Open the Air Switch of Battery
8.2 Set the BCU
I. Log in
Enter correct IP address in the browser (IE, Google Chrome or Mozilla Firebox browsers are recommended), and then enter the account number and password to
log in (the login ID: installer; password: installer).
Log in the WEB interface by selecting one of the following ways:
1. WIFI:
First, connect the computer to the system’s WIFI (name: BYD+ product serial number (for example: BYD100171708-00001), password: 123456789); then
enter the IP:192.168.5.1 in the browser, and enter the account number and password to log in.
2. LAN:
Connect the battery system and the computer in the same LAN through router, get the system’s IP address on the router web page, then enter the system’s IP
address or its host name (e.g. BYD100171708-00001) in the browser, and enter the account number and password to log in.
3. Direct connection with network cable:
Directly connect the computer to the network interface of battery system with the network cable, set the computer’s IP address to put the computer and the
system on the same network segment, enter the IP: 192.168.6.1 in the browser, and enter the account number and password to log in.
The interface after successful login is shown below: