by NUO FLUX, Руководство пользователя

Страница: 9 / 11

NÜO Flux Manual
Installation
9
NÜO FLUX
3. Installation in other environments:
1) Using a level, create a niche on the surface
where the reader is to be placed measuring 78
x 78 x 30 mm. Create 4 holes forming a square
measuring 80 x 80 mm for M3 screws. You
can use tapped holes in order to avoid having
to use nuts.
2) Remove the NÜO FLUX reader front glass
panel using the suction cup supplied. Place
the suction cup in a corner for ease of oper-
ation.
78
80
78 80
3) Place the reader in the hole and insert the
screws in the holes located in the corners of
the reader.
4) The equipment can be installed with the
screws, nuts and washers supplied, or if
tapped holes have been used then only the
screws are required. Once secure, place the
front glass panel to complete the installation.
Assembly the equipment on outdoor or indoor surfaces that are free from vibrations.
The wiring shall be suitably protected.
Installation in other environments