05/12
6. COMPONENTS
SEAT CLAMP :
1.
Seat clamp- assembled
1.1
Seat clamp base with toothing
1.2
Seat clamp pressure spring
1.3
Seat clamp upper part
1.4
Seat clamp screw Torx T25 with washer
(optional: Allen 5mm)
HEAD :
2.
Head base part with fine toothing
2.1
Internal backstroke damper
SPRING ARM :
3.
Spring arm with spring plate
3.1
Elastomer - stop damper
3.2
M5 headless screw (Allen, 2.5 mm)
SPRING ELEMENT :
4.1
Flat wire steel spring
4.2
Elastomer – central damper
4.3
Spring end cap with centring pin
SMALL PIVOT BEARING :
5.1
Igus plain bearing inner diameter 6.5 mm
5.2
Stainless steel pin outer diameter 6.5 mm
LARGE PIVOT BEARING :
6.1
Igus plain bearing inner diameter 8 mm
6.2
Stainless steel pin outer diameter 8 mm
SEATPOST BODY :
7.
Seat post tube with base part
7.1
Internal backstroke damper
8.
Mudcover
7. SPRING ELEMENTS
Für die Parallelogramm gefederte G.2 ST / LT Sattelstüt-
ze werden verschieden starke Federelemente angeboten,
die einfach und schnell gewechselt werden können (siehe
Seite 08-09). Anhand der folgenden Tabelle können Sie
sich bei der Wahl des richtigen Federelements orientie-
ren, wobei die Kriterien Fahrergewicht, Fahrposition und
Fahrprofil in die Entscheidung einfließen.
Permissible rider weight =
body weight of the rider + additional weight (e.g. backpack)
Spring elements are available in soft, medium, standard,
hard and extra hard for riders with a body weight ranging
from 45 to 150 kg. The spring elements are marked with a
colour code indicating their properties.
Only use spring elements made by the by.schulz company
for the G series seat posts. Using third party components
may interfere with the function of the seat post and may
cause accidents, personal injuries, material damages and
the loss of claims based on liabilities and guarantees (see
page 11).
Length 72mm
Length 102mm
Instal Operating Instructions G.2 ST / LT Seatpost
G.Serie LT Spring element
G.Serie ST Spring element
