BWT OCTO +450, Инструкция по установке и эксплуатации

Страница: 17 / 44

17/44
2020/09- Version: L Code : 97112223
HOTLINE
BWT myPOOL TROPIC WOODEN POOLS
30
33
31
L 450
L 540
L 510
L 640
635 mm
680 mm 539 mm 635 mm 680 mm
32
635 mm
635 mm
Mount the wooden corbels along the lengths as shown.
10. MOUNTING THE LINER LOCKING TRACK & FITTING THE UNDERLAY
34
IMPORTANT !
Check that the structure is correctly assembled
before mounting the liner locking track..
To do this:
• use a spirit level to check that the structure is
horizontal around the entire periphery.
• check that the 4 diagonals are equal in length..
Fix any imperfections before continuing.
The liner locking track should be flush with the top of
the wooden structure.
Before mounting the liner locking track, pre-drill using a Ø 3mm drill bit.
Avoid over tightening, this could cause the screws to break through the track.
Each side of the pool is fitted with one track 1.18 m long and another track trimmed to fit, see the table
below.
Trim 8 tracks according to the table below. Before making the cuts, check that the total length of the track
is equal to the length of the wall less 10 cm. Use a mitre box to ensure that the cuts are clean and straight.
Deburr the cuts using the fine grain file.