BWT Liff Powermag PM100S, Инструкция по установке и эксплуатации

Страница: 8 / 11

8
E
Connection Terminals

Connect terminals marked L (Live), N (Neutral) and E (Earth) on
the right of the terminal box to the fused switched spur for the
mains power supply (using the flying lead supplied with the panel
or similar)

Connect flying lead from Powermag coil assembly to the terminals
marked:
+ (use brown cable)
- (use blue cable)
E (use green / yellow cable)
–
NOTE: a spare Earth terminal is available
on the left of the terminal block

Connect thermistor cable to 2 central terminals marked TEMP (or
Thermistor). The thermistor circuit is a loop so the terminals can be
connected either way round

Terminals 7,8 and 9 are for BMS and fault monitoring systems only
The diagram below shows the monitoring relay in the power OFF state. When power
is ON the terminals 7 and 8 will close circuit