4
AUS
1
Safety Instructions
1.1
General safety instructions
The product has been manufactured according to
the generally recognised rules and standards of
technology and complies with the legal regulations
in force when it was brought into circulation.
Nevertheless, there is still a risk of damage to per-
sons or property if you do not follow this chapter
and the safety instructions in this documentation.
●
Read this documentation thoroughly and in full
before working with the product.
●
Retain the documentation in such a way that it is
accessible to all users at all times.
●
Always hand over the product to third parties to-
gether with the full documentation.
●
Follow all of the instructions in relation to the
proper handling of the product.
●
If you detect damage to the product or the mains
supply, stop its operation and notify a service
technician immediately.
●
Use only accessories, spare parts, and consu-
mable materials that have been approved by
BWT.
●
Maintain the environmental and operating con-
ditions specified in the “Technical data” chapter.
● Use your personal protective equipment. It en
-
sures your safety and protects you from injury.
●
Only perform tasks that are described in these
operating instructions or if you have been trai-
ned to do so by BWT.
●
Perform all tasks in compliance with all of the
applicable standards and provisions.
●
Instruct the operator in the function and operati-
on of the product.
●
Instruct the operator in the maintenance of the
product.
●
Instruct the operator in relation to potential dan-
gers that may arise while operating the product.
1.2
Scope of the documentation
This documentation applies exclusively to the pro-
duct whose production number is listed on the title
page and in chapter 12 “Technical data”.
This documentation is intended for operators, end
users, fitters without training from BWT, fitters with
training from BWT (e.g. drinking water specialists),
and BWT service technicians.
This documentation contains important information
for fitting the product safely and properly, starting
up, operating, using, maintaining, and disassem-
bling the product, and for correcting simple faults
internally.
Read this documentation in full before working with
the product. Pay particular attention to the safety
instructions chapter.
1.3
Personnel qualifications
The installation work described in these instructions
requires basic knowledge of mechanics, hydraulics,
and electrics, as well as knowledge of the corres-
ponding specialist terms.
To ensure that the device is installed safely, this work
must be performed only by a qualified specialist or
a trained person under the guidance of a qualified
specialist.
A qualified specialist is anyone who can assess the
work assigned to him or her, identify potential risks,
and take suitable safety measures thanks to his or
her specialist training, knowledge, and experience
as well as his or her knowledge of the applicable
regulations. A qualified specialist must comply with
the applicable specialist regulations.
1.4
Transport and installation
Whenever possible, transport the plant as a comple-
te unit. If the plant has to be dismantled for transport,
check the completeness of the individual parts.
When there is a risk of frost, empty all water supply
parts.
Always lift and transport the plant or plant parts only
at the provided transport eyes and/or attachment
points.
The plant must be installed or mounted on a suffici
-
ently stable and level vertical or horizontal base and
sufficiently protected against falling or overturning.
