AIR-EAGLE
®
XLT
900MHz RF Repeater
MODEL 441-4500-DC
FREQUENCY SET-UP
This unit is shipped from the factory with SEL1 switches in the open
positions and is operating on frequency #1. If you wish to change the
default frequency setting, follow the instructions below:
1) Remove power from unit and remove top cover.
2) Select desired network frequency using table below.
3) Reattach cover and apply power. Programming is now complete..
FREQUENCY SELECTION
SEL 1
(SW5, 6 & 7):
Network
Frequency
SW5
SW6
SW7
#1
(default)
OPEN
OPEN
OPEN
#2
CLOSED
OPEN
OPEN
#3
OPEN
CLOSED
OPEN
#4
CLOSED
CLOSED
OPEN
#5
OPEN
OPEN
CLOSED
#6
CLOSED
OPEN
CLOSED
#7
OPEN
CLOSED
CLOSED
#8
CLOSED
CLOSED
CLOSED
Note
– Switches 1, 2, 3, 4, 8 & 9 are not used on this model. Leave in
OPEN position
DIMENSIONS
SPECIFICATIONS
Power Supply
9-36 VDC, 16 W, 50/60 Hz
Fuse Protected
2 amp
Frequency
900MHz Spread Spectrum
RF Networks
Eight independent network frequencies
RF Output Power
250mW
Transmit Range
Up to 2500 feet with supplied antenna
Transmitter Data
Repeater
Enclosure
Polycarbonate, IP66 (NEMA 4)
Operating Temp
-40
o
F - +185
o
F
ACCESSORIES
Standard Antenna (Included):
900MHz TNC
“Rubber Duck” Antenna
49-1103
High Gain Antennas
–
Used to help achieve max range in both non line of sight and line
of sight applications. - Contact BWI Eagle for recommendations
900MHz Thru-Hole Mount Omni Directional Antenna
49-2101
900MHz Magnet Mount Omni Directional Antenna
49-2102
900MHz Omni Directional Antenna
49-3101
900MHz Yagi Antenna
49-3102
High Quality Coax Cables
–
Used to connect external high gain antennas to control unit
Flex Coax Cable w/Connectors
– Available
in 5
’,15’,25’,30’,40’,60’,80’,100’ Lengths
49-4000-XX
(XX = # of Feet)
Bulkhead Extensions
–
Used to provide an external antenna connection when mounting
control unit inside another enclosure
TNC Male to TNC Bulkhead Cable Assembly
-
Available in 2’, 4’, 7’ Lengths
49-5004-X-ISO
(X = # of Feet)
LIMITED WARRANTY STATEMENT
BWI Eagle Inc. warrants the Air-Eagle Remote Control System, if properly used and
installed, will be free from defects in material and workmanship for a period of
1 year
after date of purchase. Said warranty to include the repair or replacement of defective
equipment. This warranty does not cover damage due to external causes, including
accident, problems with electrical power, usage not in accordance with product
instructions, misuse, neglect, alteration, repair, improper installation, or improper
testing. This limited warranty, and any implied warranties that may exist under state
law, apply only to the original purchaser of the equipment, and last only for as long as
such purchaser continues to own the equipment. This warranty replaces all other
warranties, express or implied including, but not limited to, the implied warranties or
merchantability and fitness for a particular purpose. BWI Eagle makes no express
warranties beyond those stated here. BWI disclaims without limitation, implied
warranties of merchantability and fitness for a particular purpose. Some jurisdictions
do not allow the exclusion of implied warranties so this limitation may not apply to
you. To obtain warranty service, contact BWI Eagle for a return material
authorization. When returning equipment to BWI Eagle, the customer assumes the
risk of damage or loss during shipping and is responsible for the shipping costs
incurred.
DOCUMENT DATE: 1/13/21 / PRODUCT REV. 0
105 Bonnie Drive
Butler, PA 16002
(724) 283-4681
Fax (724) 283-5939
