BWI Eagle AIR-EAGLE XLT 441-20100-DC, Информационный бюллетень о продукции

Страница: 2 / 4

AIR-EAGLE
®
XLT
900 MHz RF Receiver
MODEL 441-20100-DC
RELAY & FREQUENCY SET-UP
The unit is shipped from the factory with SEL1 switches in the open
positions. The relay will operate as maintained momentary and unit is
receiving commands on frequency one. If you wish to change these
default settings, follow the instructions on the table below.
1) Remove power from unit
2) Remove top cover.
3) Select desired relay operation and/or network frequency using table
below.
4) Reattach cover and apply power.
5) Programming is now complete.
RELAY CONFIGURATION
SEL1
(SW1-2)
Relay Operation SW1 SW2
Momentary (default) OPEN OPEN
Toggle/Latch CLOSED OPEN
Latching OPEN CLOSED
OPTIONS
SW3 Vibrating Feedback Off Vibrating Feedback On
SW4** Repeater Function Off (default) Repeater Function On
Maintained Momentary
– Relay mimics button or input – when
depressed or closed, relay will be energized; when released, relay de-
energizes
Toggle/Latch
– Relay changes (and holds) its state each time the
corresponding button or input is depressed or closed.
Latching
– Relay requires two buttons or inputs for operation –
momentary press of 1
st
button energizes relay; momentary press of 2
nd
button de-energizes relay
** Enable SW4 Repeater Function in ONLY one Receiver per System
FREQUENCY SET-UP
SEL1
(SW5-7)
Network
Frequency
SW5 SW6 SW7
1 (default) OPEN OPEN OPEN
2 CLOSED OPEN OPEN
3 OPEN CLOSED OPEN
4 CLOSED CLOSED OPEN
5 OPEN OPEN CLOSED
6 CLOSED OPEN CLOSED
7 OPEN CLOSED CLOSED
SPECIFICATIONS
DC Input 9
– 36 VDC, 5 W
Relay Contact SPDT 5 amp @ 120VAC or 30VDC
Fuse Protected 1 amp
Receiver Frequency 900 MHz Spread Spectrum
Receiver Range
– Dependent upon transmitter – see below:
Using Handheld TX Up to 2500 feet
Using Stationary TX &
External Antenna
Up to 2 Miles
Note: Range figures are estimates, based on free-air terrain with limited sources of
interference. Actual range will vary based on transmitting power, orientation of transmitter
and receiver, height of transmitting antenna, height of receiving antenna, weather
conditions, interference sources in the area, and terrain between receiver and transmitter,
including, but not limited to, indoor and outdoor structures such as walls, metal objects,
trees, buildings, hills, and mountains.
Receiver Channels Seven independent network frequencies
Operating Temperature -40
o
F to +185
o
F
Enclosure Polycarbonate NEMA 4, 12, 13
– IP66
Weight Approx 2 lbs.
DIMENSIONS
REPLACEMENT PARTS & ACCESSORIES
Standard Antenna (Included):
900MHz Portable Antenna (For distances up
to 2500 feet*)
49-1103
Optional Antennas and Accessories
–
Used to increase range in both non line of sight and line of sight
applications. - Contact BWI Eagle for recommendations
900MHz Omni Directional Antenna (For
distances up to 2 miles*)
49-3101
900MHz 13dB Yagi Antenna
Long Range Operation (For distances up to
4 miles*)
49-3102
Flex Coax Cable w/Connectors
49-4000-XX
(XX = # of Feet)
2 Ft. Bulkhead Assembly (Used when
mounting receiver inside another enclosure)
49-5004-2